Fishman SBT-C Manuel d'utilisateur Page 1

USER GUIDESBT

102. Apply an adhesive pad to the shiny brass face of the transducer and mount outside the instrument, at the location indicated in step 1. The transd

11For piano mountingThe SBT-HP should be mounted to the piano soundboard at a location adjacent to the higher strings. For example, on a grand piano t

www.fi shman.com009-030-001 Rev D 5-10

2Read Me First!Installation of this product is a straightforward procedure, but we recommend this job only if you are an experienced repair technician

3Installing the Model SBT-CParts• SBT-C Pickup with 1⁄8” Shielded Jack• (3) Double-sided Adhesive Pads• Adhesive-backed Jack Holder• Felt-covered

4PreparationThe model SBT-C may be mounted onto a classical guitar, a steel string guitar, a dulcimer and similar stringed instruments. The installati

5below the highest pitched string noting the position where these two measure-ments meet. This will serve as a test location.2. Apply an adhesive pad

6adjacent to the soundhole.5. Insert the jack into the jack holder and plug the instrument cable into the jack.6. Attach the felt-covered strain relie

7Installing the Model SBT-EFollow the same procedure as the Model SBT-C on page 3 to mount thepickup element.Parts:• SBT-E Pickup• ¼” Fishman Switchj

8Install the pickup1. Widen the endpin hole to 15/32” (11.9mm) to accommodate the endpin jack. For additional information, please refer to the Switchj

9Installing the Model SBT-HPThe Model SBT-HP is designed for harp or piano.Parts• SBT-HP with 42” Cord and ¼” Jack• (3) Double-sided Adhesive Pads•